For some, obtaining a deep rich, sun kissed skin color is a top priority. The problem is that not only does soaking in the rays take time, the damage caused by UV exposure can be life threatening. Those harmful effects can be avoided when one uses a self tanning lotion to build their golden glow.
Sunburns, spots of discoloration, leather skin and melanoma are just a few of the risks one takes when opting to lay in the sun. UV bulbs are just as dangerous, as they may increase one's chances of getting cancer by up to 75%. There are products available that can deliver a deep tan in a safe way.
Mousse, gel, milk, spray and cream are just a few of the formats in which these products are available. A lot of individuals prefer to use lotions as they are less mess and simple to apply without assistance. The whole process may seem tedious at first, though with practice it becomes the most reliable way to get a natural looking and lasting glow.
Before getting started, make sure the right tools are on hand to help achieve the best results possible. Time is perhaps the most important factor in the process. Having a couple of hours to do a smooth application and allow for a thorough drying is key to getting a complete and even covering and avoiding the possibility of transferring color to one's clothing.
Exfoliating should be performed daily for the week before application and especially on the day of, since it removes dead skin cells and provides a fresh layer to which the color may adhere. Any shaving one plans to do is best done at least an hour prior, and moisturizer needs to be used for a full seven days ahead of time, concentrating on rough areas like the ankles, knees and elbows. Following these tips will prime the dermis to accept the color easily.
Start by making sure one's hair is pulled up and back out of the way, that the body is completely cool and dry, and that there is no steam or moisture in the application space. Gloves should be worn to protect the palms and make the color look more natural. Moving slowly and concentrating on one area at a time, apply the product in broad, even swipes in a uniform direction.
There are a few places on the body that have a tendency to be naturally darker than the surrounding areas. These are usually the thicker skinned sections like the elbows, knees and ankles, each of which have deeper lines that hold more color. To keep from obtaining a dirty appearance, dilute the tanner in a 50/50 mix with a moisturizer when applying to these zones.
Though a longer drying time is recommended for more solid results, fifteen minutes is the minimum one should wait before dressing after the process is complete. A damp cloth or quick shower should be sufficient to even out any dark spots or streaks that might have appeared. Building a base color by applying thin layers of tanner over a few days will help to avoid the odd orange tint that may occur with thick applications.
Sunburns, spots of discoloration, leather skin and melanoma are just a few of the risks one takes when opting to lay in the sun. UV bulbs are just as dangerous, as they may increase one's chances of getting cancer by up to 75%. There are products available that can deliver a deep tan in a safe way.
Mousse, gel, milk, spray and cream are just a few of the formats in which these products are available. A lot of individuals prefer to use lotions as they are less mess and simple to apply without assistance. The whole process may seem tedious at first, though with practice it becomes the most reliable way to get a natural looking and lasting glow.
Before getting started, make sure the right tools are on hand to help achieve the best results possible. Time is perhaps the most important factor in the process. Having a couple of hours to do a smooth application and allow for a thorough drying is key to getting a complete and even covering and avoiding the possibility of transferring color to one's clothing.
Exfoliating should be performed daily for the week before application and especially on the day of, since it removes dead skin cells and provides a fresh layer to which the color may adhere. Any shaving one plans to do is best done at least an hour prior, and moisturizer needs to be used for a full seven days ahead of time, concentrating on rough areas like the ankles, knees and elbows. Following these tips will prime the dermis to accept the color easily.
Start by making sure one's hair is pulled up and back out of the way, that the body is completely cool and dry, and that there is no steam or moisture in the application space. Gloves should be worn to protect the palms and make the color look more natural. Moving slowly and concentrating on one area at a time, apply the product in broad, even swipes in a uniform direction.
There are a few places on the body that have a tendency to be naturally darker than the surrounding areas. These are usually the thicker skinned sections like the elbows, knees and ankles, each of which have deeper lines that hold more color. To keep from obtaining a dirty appearance, dilute the tanner in a 50/50 mix with a moisturizer when applying to these zones.
Though a longer drying time is recommended for more solid results, fifteen minutes is the minimum one should wait before dressing after the process is complete. A damp cloth or quick shower should be sufficient to even out any dark spots or streaks that might have appeared. Building a base color by applying thin layers of tanner over a few days will help to avoid the odd orange tint that may occur with thick applications.
About the Author:
If you would like to find the best self tanning lotion, check out this link to Sun Lab's Ultra Dark Instant Tint. For details on Sun Lab's overnight tanning lotion, click this link here.
No comments:
Post a Comment